how is this still an issue??? (calling all advanced users!) denominator issue
so since creo 3.0 every time i use (fraction dimensions) either the diameter dimension (by double clicking on a hole in the drawing) or the arc dimension (again in the drawing) the default denominator...
View ArticleClik here to view.
Re: Non-symmetric results for symmetric model and load?
Anges,I've attached the model, and I found out that the more brick elements I added, the smaller the % difference between the max and min radial (R) displacement. You don't have to use as many...
View ArticleRe: How to designate parameters automatically using Model check ?
HiIs there any option inside model check setting to skip the parameter value to be entered when interactive is running. In one of the parameter we set "string " as an data type and entered the...
View ArticleClik here to view.
Re: Introduction to Creo Simulate Tutorial
Jim, I've been using Creo Simulate since it's introduction with 1.0, and prior to that, all the way back to Mechanica and Pro|Mechanica (1999).
View ArticleRe: Having some graphics issues with creo 3.0
Adding that to the config.pro file seems to have fixed the problem.
View ArticleRe: Edit Type > Presentation Editor interface is antiquated
Peter's suggestion is correct, but comes with conditions:The cache for the item presentation templates will not be updated, so a server restart is required.In addition, the XML edits are not validated...
View ArticleRe: Annotations and Layers
Well, according to this document, the ability to control the visibility of annotations by layer was removed in Creo 1. They recommend using "Combined View States", which is fine if you're doing model...
View ArticleClik here to view.
Re: File extension change from xls to xlsm
Hello Kael, I have already opened a case: 12429495.I will write them and inform about the RFC 1025839. Thank you for all your help. Cristina
View ArticleRe: In Creo 2.0 (MOD 080) can users borrow more than 1 license?
Tom, exit Creo session and test two following commands: command no.1"<Creo 2.0>\Common Files\Mxxx\x86e_win64\obj\lmutil.exe" lmborrow -return 7788@123.45.67.890 PROE_EngineerIV-OR-lmutil.exe...
View ArticleRe: Documentation of the return codes for si commands
Hello Günter, Please take a look at CS93042: Include CLI / API Exit Code Information in Integrity Documentation. I have updated it to include the return codes published in the CLI Reference Guides. I...
View ArticleRe: In Creo 2.0 (MOD 080) can users borrow more than 1 license?
Dear Martin, As always THANKS!! I tried, and failed both times. I keep getting 7788@ which ever I choose not currently borrowed. I have a feeling it has to be something on the server side. With your...
View ArticleRe: Why isn't MC Prime 3.1 upgrade available for download?
Mark Buckton wrote: Maybe PTC have something against the UK and its former colonies. I am in Australia ... Looks like you're right .... Daniel Sochor wrote:I have the same issue here in the US. ...
View ArticleClik here to view.
Re: creo 3.0 Intelligent Fastener Extension, can we add new parameters to the...
Tom, I added those two options to my config.sup and it worked, turned it off and removed it from the toolbar. I did a further test and added them to my local config and set them to yes which turns it...
View ArticleClik here to view.
Problem with Group/Ungroup feature in Creo Layout 2.0
Hi,please help me.I create geometry in Creo Layout using group/ungroup feature. Save a file and close Creo. The next day group/ungroup feature not available in this file. I can't edit existing...
View ArticleClik here to view.
Re: drawing "fill" option issue
the sketcher fonts which are used in detailing as draft entities mainly cause this issue.and its simply very annoying. even when I switch between part and detailing the fill disappears.
View ArticleRe: Posting Product Ideas
I assume that there is currently no provision to post a Product Idea in the specified topic.
View ArticleClik here to view.
Replace to space in Mathcad 15 and Prime
I can find and replace 2 for example to space in Mathcad 15 (Ctrl+h) but cannot do it in Prime Is it a bug?
View Article